LNG to CNG Refueling Skid: Process, Components, and Selection Guide
An LNG to CNG refueling skid uses liquefied natural gas (LNG) as its feedstock and converts it into compressed natural gas (CNG) for vehicle fueling. The typical process is to store LNG at cryogenic temperature, pump it to the required pressure while it is still liquid, vaporize it, and deliver the conditioned gas to a CNG dispenser. This approach can suit locations where a pipeline supply is unavailable or where LNG logistics are already part of the project. At Dongzhao, we help buyers define the process scope and skid requirements around the site, vehicle demand, and applicable local codes.
Key Takeaways
- An LNG to CNG skid converts stored LNG into high-pressure gaseous fuel for CNG vehicles.
- Its main process equipment typically includes an LNG pump, vaporizer, controls, safety devices, and connections to the dispensing system.
- Capacity, outlet pressure, ambient conditions, storage, and local compliance requirements should be confirmed before equipment selection.
- Ask suppliers for a clearly defined scope, interface list, and project-specific technical proposal rather than comparing equipment names alone.
What Is an LNG to CNG Refueling Skid?
An LNG to CNG refueling skid is a packaged process unit that changes natural gas from its liquid, cryogenic state into a high-pressure gas suitable for CNG dispensing. Unlike a conventional CNG station supplied by a gas pipeline, it receives LNG from a storage tank or another defined cryogenic source. The skid itself is only one part of the station: storage, unloading, dispensing, civil works, utilities, and site safety provisions may be separate project packages.
LNG is commonly stored at approximately -162°C, although actual conditions depend on composition and operating pressure. Liquefaction greatly reduces the volume needed for transport; a commonly used estimate is that LNG occupies roughly 1/600 of its gaseous volume, with the exact ratio depending on gas composition and reference conditions. This makes LNG a practical supply option for some remote or off-grid fueling locations, but it also means cryogenic handling and pressure-system design must be treated as core engineering requirements.
How the Conversion Process Works
- LNG receipt and storage: LNG is transferred from a delivery vehicle or other supply arrangement to a compatible insulated storage tank. The tank, unloading connection, and operating procedures must be designed for the project’s supply method.
- Liquid pressurization: A cryogenic pump raises the LNG pressure before vaporization. Pump selection depends on the required flow, pressure, operating range, and the characteristics of the LNG supply.
- Vaporization and gas conditioning: A vaporizer adds heat so the pressurized liquid becomes gas. Depending on the design, the system may also include temperature monitoring, pressure regulation, metering, or other conditioning equipment.
- Control and dispensing: Instruments and control logic monitor operating conditions and coordinate the process. The conditioned gas is sent to the dispensing system, which delivers CNG to vehicles within the station’s approved operating limits.
These steps are a process overview, not a substitute for a project-specific process flow diagram. Equipment arrangement and protection measures vary with capacity, local regulations, site layout, and the selected storage and dispensing systems.
Main Components and Functions
| Component | Primary function | Buyer consideration |
|---|---|---|
| LNG pump | Pressurizes LNG before it enters the vaporization stage. | Confirm required flow, pressure, turndown, and compatibility with the feed conditions. |
| Vaporizer | Transfers heat to convert pressurized LNG into gas. | Review capacity, heat source, local ambient conditions, and operating continuity. |
| Piping and valves | Route and isolate cryogenic liquid and high-pressure gas. | Check material suitability, pressure rating, layout, and maintenance access. |
| Instrumentation and controls | Monitor process conditions and support operating and shutdown functions. | Define control interfaces, alarms, power supply, and integration responsibilities. |
| Safety devices | Provide protection as specified by the engineered system and applicable codes. | Confirm project safety philosophy, device scope, and documentation requirements. |
Typical Applications and Project Fit
This equipment may be considered for fleet depots, logistics hubs, bus or truck fueling sites, and locations where a pipeline connection is not available or practical. It can also be relevant where LNG is already delivered for other uses and a CNG fueling option is needed. Suitability depends on the fuel supply chain, expected vehicle demand, operating schedule, and the ability to manage cryogenic deliveries safely.
An LNG to CNG solution is not automatically the best choice for every station. A pipeline-fed CNG station may be more appropriate where a reliable gas connection is available, while direct LNG dispensing may better match vehicles designed for LNG. A project comparison should include total system scope, energy use, operating requirements, and the needs of the vehicles—not only the cost of the skid.
Key Specifications to Confirm
Start with required dispensing capacity, stated in units such as kilograms per hour (kg/h), and clarify whether the figure represents continuous operation, peak demand, or a defined filling profile. Confirm the required gas outlet pressure against the vehicles and dispensing equipment: 20 MPa (200 bar) is a common nominal working-pressure reference for CNG vehicle systems, but the applicable target and design pressure must be verified for the market and equipment in question. Do not treat this reference as a universal skid specification.
Also provide the LNG supply conditions, site ambient-temperature range in °C, electrical supply, available utilities, and required control-system interfaces. Ask the supplier to state the design conditions, operating envelope, battery limits, included equipment, and exclusions. These details make quotations easier to compare and reduce the risk of mismatched connections or missing project scope.
Dongzhao are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
How to Select an LNG to CNG Skid
Match capacity to real demand
Share the expected vehicle types, number of vehicles, fueling windows, and anticipated daily or peak demand. A single peak-flow figure may not describe how the station will operate, particularly when multiple vehicles refuel in sequence or at the same time. Ask the supplier to explain the assumptions behind the proposed capacity.
Define the complete battery limits
Clarify what is included in the skid and what is supplied by others. For example, storage tanks, LNG unloading equipment, dispensers, foundations, electrical installation, and site piping may be outside the packaged unit’s scope. A written interface list helps the owner, EPC contractor, and equipment supplier coordinate responsibilities.
Review compliance and documentation early
Applicable pressure equipment, hazardous-area, fire-safety, and environmental requirements differ by jurisdiction. Provide the project location and applicable standards during quotation, then confirm which design, inspection, and documentation requirements the supplier can support. Avoid relying on generic statements of compliance without checking the project’s actual regulatory basis.
Supplier Support and Questions to Ask
A capable supplier should be able to discuss process configuration, equipment scope, site interfaces, and the information needed to prepare a project-specific offer. Request a technical proposal that identifies design assumptions, operating limits, utility requirements, instrumentation scope, and exclusions. You should also clarify documentation, inspection points, delivery responsibilities, commissioning support, and the availability of spare parts or after-sales assistance.
At Dongzhao, we work with buyers to review LNG supply conditions, required CNG output, site constraints, and project interfaces before defining a skid proposal. The final configuration should be based on confirmed technical inputs rather than a generic capacity label. For an initial review, prepare the target flow rate in kg/h, required outlet pressure in MPa, site ambient range in °C, and the intended vehicle and station application.
Conclusion: Is an LNG to CNG Refueling Skid Right for Your Project?
An LNG to CNG refueling skid can provide a route to CNG fueling where LNG is the selected natural gas supply and a pipeline-fed station is unsuitable. Its core process—pumping LNG, vaporizing it, and delivering conditioned gas—must be engineered around demand, pressure, site conditions, safety requirements, and vehicle compatibility. The most useful next step is to prepare a project brief with supply conditions, demand profile, target pressure, location, and package boundaries.
Share those details with Dongzhao to discuss a suitable configuration and clarify what belongs within the skid scope. A well-defined technical review gives your team a more reliable basis for comparing proposals and moving toward procurement.

Comments
0