Fiberglass Mesh Concrete Reinforcement - Nanjing EFG Co.,Ltd
Production Description
For more information, please visit XZH.
Fiberglass mesh cloth is an inexpensive material that does not burn. It is elastic, low weight, and has good strength. It is impregnated with a solution that gives it resistance to alkali plaster. In recent years, fiberglass mesh is becoming more popular in repair and construction, and finishing works.
Application
It has been widely used on facades, ceilings, uneven surfaces, and corners;
It can significantly improve the strength and mechanical properties of surfaces are reinforced;
For reinforcing walls and ceilings during the plastering work.
Characteristic
A: Able to withstand high longitudinal and transverse load;
B: Have a good grip on the mineral binders mixtures;
C: High resistance to stress corrosion and chemical resistance;
D: Easy to install (does not require additional skills);
E: Resistant to high temperatures, temperature range from - 200°C to +550°C, and silica fiberglass,
fabrics up to + centigrade;
G: High electrical insulation properties;
H: Different types of weaves: plain, satin, twill.
Specification
1m×30m/roll, 1m×50m/roll, 1m×100m/roll, 1m×150m/roll
How to operate fiberglass mesh on the plaster, gypsum wall, drywall, ceilings...
The base, which is home to plasterwork, must be solid and clean. Remains of old paints, coatings, grease, and dust should be removed. Irregularities of more than 20mm should be filled with plaster composition. Base with high moisture absorption should be primed.
The application of plaster.
The prepared substrate evenly over the entire surface of the plaster is applied notched trowel.
If you are looking for more details, kindly visit China Fiberglass Mesh.
Installation and indentation of glass cloth mesh.
Place the plaster mesh glass cloth on the inner surface in the form of vertical stripes with overlapping webs of at least 10cm, and press into the painting and adhesive mortar with a trowel or spreader. The layer thickness reinforcement should be not less than 3mm.
Mounting angle elements.
Place the corner pieces on plaster, grid pressed into the plaster with a trowel or spatula.
The application of the final layer of plaster.
When completely dry painting and adhesive apply a final coat of plaster.
The device of window and door openings.
Window and door openings are reinforced with additional strips of mesh width of 300mm and installed prior to the application of the first reinforcing layer.
Fiberglass Net Glass Fiber Mesh Reinforced Fiberglass Mesh Fabric
Specification
Characteristic
1. High tensile strength
2. Alkali resistant
3. Good cohesion
4. Can firmly combine with EPS board
Application
1. Fiberglass mesh is used for wall reinforcement.
2. Fiberglass mesh is an ideal material for exterior wall heat insu
3. Fiberglass mesh can be applied to bitumen as roof waterproofing material, so as to strengthen the tensile strength and extend the lifetime of bitumen.
4. For Reinforcement of marble, mosaic, stone, and gypsum board.
Drywall finishers use the mesh frequently. In fact, it is common to replace the paper tape used to float the joint between two pieces of drywall. The mesh that drywall finishers use comes on a roll just like paper drywall tape. The added benefit for the drywall finisher is to roll out the mesh over a great distance before having to apply the first coat of joint compound. Not only does it help them in this manner, but it also causes a stronger bond between the joint compound, the tape, and the wall.
Drywall finishers also use this tape to patch holes. The most common hole in the drywall generally occurs where a doorknob has hit a wall too many times. If it is only slightly damaged, a couple of short pieces of the tape will be formed into a square and placed over the hole. A joint compound will then be applied directly to it. If the hole is too large to patch with fiberglass mesh alone, a piece of metal flashing can be added behind the tape before applying the joint compound. Construction work is not the only use for fiberglass mesh.
As a filtering system, alkali-resistant fiberglass mesh works really well. As the water flows through it, the mesh catches even the smallest impurities. In addition to this use, it can also be used as a mosquito net.
Finally, fiberglass mesh is sometimes woven into protective clothing used by those who work with dangerous chemicals or firefighters. Tightly woven mesh is put together and shaped into jackets that firemen wear when they are battling ablaze. It protects them from any fire that might ignite their clothing while fighting a fire. Fiberglass mesh can also be used in mold making and as protection against corrosives.
Fiberglass mesh is a C glass fiber yarn as a base cross, is coated with an alkali-resistant latex, excellent alkali resistance, warpage, and has a tensile strength characteristic of the weft.
Packing
Shrink film, then in cartons.
Company Profile
Established in , NANJING EFG CO., LTD has been professional in glass fiber and polyester fiber nonwoven mat created her vision that " Create a well-known international brand in the field of non-woven fiberglass material ", the products fiberglass mat, polyester mat, coated mat, reinforced mat are delivered to Europe, Middle East, North Africa, Asia, USA, Latin America, customer use NJEFG®, products for waterproof, filter, wall decoration, gypsum board, FRP surface, etc., quality and service are satisfied by customer.
With professional engineers and advanced producing lines, NJEFG®, always focus on offering customization to customers for special demands and developing new products for the market.
Every employee in NJEFG® has interjected faith into the daily work and life. When you cooperate with NJEFG®, you will find that you are working with a professional team with active and high efficient service, stable quality, and a memorable reputation.
NJEFG® products cover the market of Middle East, North Africa, southeast Europe, North Europe. To have good service to the customers NJEFG runs series of branch companies and joint ventures in Hong Kong, Algeria, and Iran.
Certifications
Why choose us
Nanjing EFG Co., Ltd, as one of the fiberglass materials suppliers in China, has been a professional manufacturer of fiberglass and polyester non-woven fabric for more than 15 years, we have been committed to providing a full range of products for our customers.
We also customize high-quality, cost-effective products and seek to enhance our services with a view to delivering a positive and delightful customer experience.
According to your needs, what we can provide is not only strategic planning, reliable solution, consultancy, and guidance, but also detailed implementation actions according to your situation.
To get more information about our capabilities, please contact us.
FAQ
Q1.What's the MOQ?
A: Usually SQM format or 1 Ton for glass fiber.
Q2.How can I get a sample?
A: Normally small samples can be sent free of charge and customers just need to bear the shipping charge, or you can provide your DHL, FEDEX, EMS, UPS courier account number to us. For bigger sizes, it depends.
Q3.How do you do quality control?
A: We have the most professional tech team and experienced workers, from material choosing, production process to final packing, all are under strict control to make sure you can sure you can get the qualified fiber products.
Q4.Can your company customize products?
A: Yes, We usually discuss with customers and help them find solutions.
Q5. How long does the sample take you to check quality?
A: Usually a sample will be prepared within one week after the specification is agreed.
Q6.What about your delivery time? Can we receive our goods on time?
A: Usually around 2-3 weeks after the order is confirmed. The exact delivery time depends on order quantity and Off-season/ busy season.
For more Fiberglass Mesh manufacturerinformation, please contact us. We will provide professional answers.
Comments
0