A cast iron floor flange is a flat-based fitting used to connect a pipe or tube to a floor, wall, or other supporting surface. Buyers typically choose one by checking the pipe or thread size, flange base dimensions, mounting-hole layout, material and finish, and intended load or environment. Common nominal connection sizes include 1/2 in, 3/4 in, and 1 in, but the flange’s outside diameter and bolt pattern are not determined by nominal pipe size alone. At Hebei Duotong Trading Co., Ltd., we recommend confirming the drawing or product specification before placing a bulk order.
This guide is for wholesalers, importers, hardware distributors, furniture and fixture manufacturers, and project buyers comparing cast iron floor flanges. It is also useful for buyers sourcing fittings for decorative pipe assemblies, including some industrial-style shelving or bath hardware concepts. The right product depends on the full assembly rather than the flange alone. Confirm that the selected component is suitable for the intended installation and any applicable local requirements.
A floor flange is a fitting with a central opening or connection and a flat base containing mounting holes. The base is secured to a surface, while the central connection joins to a compatible pipe or fitting. Cast iron is the body material; the specific composition, casting method, dimensions, and finish depend on the product specification. A floor flange should not be assumed to be a pressure-rated plumbing component unless the supplier has documented that use for the specific model.
The flange provides a fixed mounting point for a pipe assembly and distributes the attachment across its base. Common non-pressure applications include table legs, shelving supports, display stands, garment racks, and decorative pipework. In bath hardware or interior fixtures, it may be considered as a mounting component when the dimensions, finish, corrosion exposure, and installation design are appropriate. For overhead or load-bearing installations, buyers should assess the complete structure and obtain suitable engineering guidance rather than relying on appearance or material name alone.
Floor flanges are often described by the nominal size of the connected pipe or threaded opening. Sizes such as 1/2 in, 3/4 in, and 1 in are common examples in pipe-fitting and decorative-pipe markets, but availability varies by supplier and design. These nominal sizes do not tell you the flange’s full outside diameter, thickness, or mounting-hole spacing. Ask for a dimensioned drawing or confirm the exact measurements before approving samples or production.
| Specification | What to Confirm | Why It Matters |
|---|---|---|
| Connection size | Nominal size and actual connection dimensions | Ensures the flange mates with the selected pipe or fitting |
| Thread standard | Whether the connection is threaded and, if so, the specified thread type | Thread standards are not automatically interchangeable |
| Base dimensions | Outside diameter, thickness, hole count, and hole spacing | Determines fit against the mounting surface and fasteners |
| Material and finish | Specified cast iron grade or material description, coating, and color | Supports evaluation for appearance and service environment |
| Installation requirements | Fastener type, substrate, load conditions, and indoor or outdoor exposure | Helps the project team assess suitability for the complete assembly |
Do not treat every threaded floor flange as NPT. NPT is one possible thread specification, and buyers should state it explicitly when required; other thread forms may have different dimensions and sealing behavior. A nominal 3/4 in connection, for example, should be verified against the mating pipe specification rather than judged by measuring the opening with a ruler. For decorative applications that use a threaded pipe, confirm both the thread standard and the usable engagement before ordering.
For furniture, display stands, or shelving, begin with the pipe or tube connection and the intended base position. Check that the flange sits flat on the mounting surface and that its holes can accommodate suitable fasteners. Surface appearance may be important, so specify the desired finish and request a sample or finish reference when visual consistency matters. For assemblies supporting people, overhead objects, or valuable goods, arrange a suitable load assessment for the complete design.
If you want to learn more, please visit our website Hebei Duotong Trading Co., Ltd..
For bath hardware or other damp-area applications, evaluate the finish and maintenance requirements rather than assuming cast iron is suitable for every exposure. Ask how the supplied surface is protected and whether the product is intended for the expected environment. If corrosion resistance is a critical requirement, compare appropriate material or coating options and request product-specific documentation. The suitability of a flange in a wet area also depends on installation, cleaning practices, and exposure conditions.
For fluid systems, confirm the product’s intended service, connection standard, pressure and temperature limits, and any required documentation before purchase. A decorative or mounting flange is not automatically suitable for conveying fluid or supporting a pressurized line. Where codes or approvals apply, the project buyer should identify them at the quotation stage and verify that the offered product meets the requirement. If the supplier cannot document the required service rating, select a product designed and specified for that application.
This process helps reduce avoidable mismatches between a flange and the rest of the assembly. If a project uses several pipe sizes or finishes, organize the specifications by item number rather than combining them in a general description. Share drawings or reference samples when dimensions are unusual. For repeat orders, retain the approved specification and identify any permitted tolerances before production begins.
The quoted price can vary with size, material specification, finish, order quantity, packaging, and any customization or inspection requirements. Minimum order quantity and lead time are supplier- and order-specific, so they should be confirmed against the exact product and destination. Buyers should also clarify whether the quotation covers samples, export packaging, labeling, or other requested services. Comparing quotations is most useful when each supplier is pricing the same drawing, finish, quantity, and delivery terms.
At Hebei Duotong Trading Co., Ltd., we support B2B buyers by reviewing product requirements and discussing suitable cast iron floor flange options for their sourcing needs. To help us assess a request, provide the intended application, connection size and thread details, mounting dimensions, finish preference, order quantity, and destination market. We can then clarify the available specification and commercial terms for the requested item. Product suitability should be checked against the buyer’s drawings and application requirements before order confirmation.
The best cast iron floor flange is the one that matches the pipe connection, mounting geometry, material and finish requirements, and intended use. Common nominal sizes such as 1/2 in, 3/4 in, and 1 in are useful starting points, but they are not a substitute for checking the complete dimensions. For B2B procurement, request a drawing and written quotation that cover the technical and commercial details. Send your specification and quantity to Hebei Duotong Trading Co., Ltd. to discuss suitable options for evaluation.
For more information, please visit cast iron floor flange.

Comments
0