22212CA/W33C3 Spherical Roller Bearing: Specifications, Applications, and Selection Guide
The 22212CA/W33C3 is a double-row spherical roller bearing intended for applications that need to accommodate radial loads, some axial load in either direction, and shaft-to-housing misalignment. Its commonly listed boundary dimensions are a 60 mm bore, 110 mm outside diameter, and 28 mm width; confirm dimensions and suffix interpretation against the supplier’s current catalog before ordering. In the designation, CA identifies a bearing design commonly associated with a machined brass cage, W33 indicates an outer-ring lubrication groove and holes, and C3 means greater-than-normal radial internal clearance. These features can suit demanding machinery, but load capacity, speed limits, fits, and lubrication requirements must be checked for the actual operating conditions.
If you want to learn more, please visit our website.
Key Takeaways
- The 22212 size is commonly specified at 60 × 110 × 28 mm (bore × outside diameter × width).
- W33 provides a lubrication groove and lubrication holes in the outer ring; it does not replace a suitable lubrication plan.
- C3 is greater-than-normal internal clearance, not a general upgrade for every application.
- Before purchasing, compare the complete designation, operating conditions, installation requirements, and supplier documentation.
Who This Guide Is For
This guide is for maintenance teams, equipment manufacturers, distributors, and purchasing professionals sourcing a 22212CA/W33C3 spherical roller bearing. It is especially useful when replacing a bearing from existing equipment or evaluating whether this designation matches a new application. The bearing number alone does not establish that a part is suitable for every machine. Buyers should match the complete specification to the equipment manufacturer’s requirements and the real operating environment.
Basic Design and Designation
A spherical roller bearing uses two rows of barrel-shaped rollers running on a spherical outer-ring raceway. This geometry allows the bearing to accommodate a degree of angular misalignment while carrying substantial radial loads, subject to its rated limits and correct installation. Its ability to accommodate misalignment is not a substitute for correcting excessive shaft deflection, poor housing alignment, or damaged fits.
What the 22212CA/W33C3 Suffixes Indicate
The CA designation generally refers to a particular internal design and cage arrangement; in many catalog systems, CA bearings use a machined brass cage. The exact construction and suffix meaning can vary by manufacturer, so confirm the product drawing or catalog entry rather than relying on the letters alone. The W33 suffix typically identifies an outer-ring lubrication groove with lubrication holes, allowing lubricant to be introduced through the housing arrangement when designed for that purpose.
C3 identifies radial internal clearance greater than the Normal (CN) range. Additional clearance can be relevant where operating temperature, interference fits, or other conditions reduce clearance after mounting. C3 should not be selected automatically: too much or too little operating clearance can affect bearing performance, so the application and mounting conditions matter.
Key Specifications to Confirm
The dimensions below are commonly listed for the 22212 size. They are useful for an initial fit check, but they do not replace a manufacturer’s drawing or a full technical data sheet. Load ratings, limiting speed, mass, tolerances, and clearance values should be confirmed for the specific brand and product version.
| Item | Common specification or meaning | Buyer check |
|---|---|---|
| Bore diameter | 60 mm | Confirm shaft size and required fit. |
| Outside diameter | 110 mm | Check housing dimensions and available clearance. |
| Width | 28 mm | Verify axial space and shoulder arrangement. |
| Internal clearance | C3, greater than Normal | Confirm the required mounted and operating clearance. |
| Lubrication feature | W33 groove and holes in the outer ring | Check housing access, lubricant type, and relubrication plan. |
Applications and Matching Considerations
Bearings of this type are used in industrial equipment where radial load capacity and tolerance of limited misalignment are relevant. Potential application areas include gearboxes, pumps, conveyors, fans, crushers, and other rotating machinery, provided the required dimensions and ratings match the equipment. These examples are application categories, not a guarantee that the 22212CA/W33C3 is suitable for every machine in them.
Tuoda Bearing supply professional and honest service.
Check the Operating Conditions
Start with the load direction and magnitude, shaft speed, duty cycle, temperature, vibration, and contamination exposure. Then assess shaft and housing fits, mounting method, available lubrication access, and the expected maintenance interval. If the bearing will operate under shock loads, severe contamination, unusually high speeds, or elevated temperatures, request a technical review rather than selecting by size alone.
Selection Framework for B2B Buyers
- Verify the original specification. Record the full marking, including 22212, CA, W33, and C3, and compare it with the equipment manual or drawing.
- Confirm dimensions and interfaces. Check the shaft, housing, shoulders, seals, and axial space. Do not assume that a similar bearing number or suffix is interchangeable.
- Review load and speed requirements. Ask for the selected product’s catalog ratings and speed guidance, then compare them with the actual duty conditions.
- Evaluate clearance and fits together. Explain the shaft and housing materials, fit, operating temperature, and installation method so the supplier can help assess whether C3 is appropriate.
- Plan lubrication and maintenance. Confirm lubricant compatibility, delivery method, relubrication access, and contamination controls. W33 is a feature for lubrication access, not evidence that the bearing is pre-lubricated.
- Confirm documentation and delivery terms. Request the product drawing, applicable inspection documents, packaging details, quantity, lead time, and quotation validity before placing an order.
Pricing, MOQ, and Lead Time
Pricing and availability depend on factors such as order quantity, product configuration, manufacturing or stock status, packaging, and destination. Minimum order quantity and lead time should therefore be confirmed in a current quotation rather than assumed from the bearing designation. For a useful quote, provide the required quantity, destination, delivery schedule, full suffix, and any documentation or packaging requirements.
Supplier Evaluation Checklist
Compare suppliers on more than unit price. Ask whether the quoted item is a complete 22212CA/W33C3 bearing, how its designation and dimensions are verified, and what product documentation is available. Confirm how the supplier handles order traceability, packaging, export arrangements, and questions about fit or lubrication; request evidence for any quality or compliance claim relevant to your procurement requirements.
Tuoda Bearing can support B2B inquiries for spherical roller bearings by reviewing the requested designation, quantity, destination, and application details. Share the bearing marking or drawing along with operating conditions to help clarify the product requirement before quotation. Availability, technical documentation, and delivery terms should be confirmed for each order.
Conclusion and Next Steps
The 22212CA/W33C3 is commonly associated with a 60 × 110 × 28 mm spherical roller bearing, a CA design, W33 lubrication features, and C3 internal clearance. It may be a suitable option where the machine specification calls for these features and the bearing’s ratings match the operating conditions. The designation alone is not enough to confirm suitability, interchangeability, or expected service life.
Before ordering, verify the complete part number, dimensions, load and speed requirements, fits, clearance, and lubrication arrangement. Send Tuoda Bearing your quantity, destination, application details, and any drawing or existing bearing marking to request a product review and quotation. This gives both sides a clearer basis for confirming the specification, availability, and delivery expectations.

Comments
0