Interior Door Buying Guide - The Home Depot

There are a lot of different types of interior door styles. Any of these types, or perhaps a mix of styles, might be right for your home.

Chaoda contains other products and information you need, so please check it out.

Slab Doors

Panel doors, also known as slab doors, contain patterns of square or oblong panels and are a classic choice. A door may contain two large panels, six small ones or some other configuration. Choose panels with straight or curved tops to suit your decorating needs.

Prehung Doors

Prehung doors come with hinges in their own frame, ready to fit into your doorway.

Accordion Doors

Accordion doors are ideal for closets and entryways with space constraints. They may consist of a few large panels or multiple small panels that fold in on themselves and rest against one side of the door opening.

Bi-Fold Doors

Bi-fold doors are a good option for closets, laundry rooms, pantries, storage rooms and other smaller spaces in your home. Choose bifold doors that fold back to one side of the opening, or bifold doors that fold back to both sides of the opening.

Barn Doors

Barn doors offer a classic, rustic look. They hang from a top rail, allowing them to slide over door openings.

French Doors

French doors brighten any room. They come in a variety of sizes, wood types, styles and glass pane configurations.

Sliding Doors

Wood or mirrored sliding doors are a good choice for closets. They use space economically, and mirrored doors do double duty. Large mirrors also make a room appear more spacious.

Cafe and Saloon Doors

Swinging hinged doors or cafe doors can add easy flow from room to room while maintaining privacy.

Hidden Doors

Hidden doors are becoming more popular in homes. They provide added security as well as a touch of whimsy to a room. They usually take the form of an outer bookcase that slides or rotates to reveal a hidden room entrance. However, these doors can be created customized to encompass more elaborate designs.

If you are looking for more details, kindly visit Wooden Door Panel.

Standard interior doors aren't all alike. Panel doors and flush doors are constructed in one of three ways: of solid wood, with a solid core or with a hollow core.

To maintain your door's warranty, you should seal and finish your door soon after it is installed. If you prefer, you can special order interior doors that come already painted, stained or finished.

Wood doors are one of the most charming materials used in interior decor, adding warmth and character to any home. However, time and other weathering elements can damage even the most beautiful wooden doors. The door panel is a core part of your door, helping to keep your property secure, insulated and private. But whether it’s a crack from a sudden impact, wear and tear from outdoor elements, or warping due to temperature changes, your wood panel might give up and need replacement as well. 

Don’t worry, though! A wood door panel replacement might sound like a professional’s job, but it’s a very manageable project that can restore your door’s function and charm. This guide will walk you through a series of steps to replace your wood door panel so your door stands tall and proud for years to come. Let’s dive in! 

What is a Door Panel?

A door panel is placed within a frame created with vertical stiles and horizontal rails. On solid wood doors, the panel is typically made from high-quality wood, offering both durability and a timeless aesthetic. In terms of design, door panels come in a variety of styles. You can choose between flat panels for a sleek, minimalist look or raised panels that add depth and elegance. 

Signs You Need to Replace a Door Panel

Here are some of the most common signs that tell you might be needing a wood door panel replacement: 

• There are cracks, dents, or breaks on the panel due to accidental damage. 
• Warping or rotting of wood due to exposure to moisture for a long period. 
• Cracking or expansion due to extreme temperature changes like heat or cold. 
• Decreased insulation which has led to drafts, energy inefficiency, or uncomfortable indoor temperatures.
• A weakened panel that makes your home more vulnerable and easier to break in. 
• Visible wear and tear from constant use, especially on solid wood front doors. 

Step-by-Step Guide to Replacing a Wood Door Panel

Here’s a hands-on and simple guide for wood door panel replacement, whether it’s for custom entryways or solid wood entry doors in your home. With a few basic tools and some patience, you’ll restore the look and function of your door.

Step 1: Prepare the Door

Start the process by taking the door off of its hinges. This will help you give a stable and horizontal space to work, making DIY much easier. Once it’s off the hinges, keep the door on a flat and soft surface like foam, with the exterior facing down. Make sure it’s steady, as this position will help you access the door panel from the interior side, especially if the panel is heavily secured.

Step 2: Remove the Glass Stops

Glass stops are slim strips that frame the door panel and hold it securely in place. Use a putty knife here to gently pry them out of the frame without doing any damage, working your way slowly along each edge. If you find any nails in the process, use a pair of pliers to pull them out carefully without splitting the wood. Removing the stops cleanly will give you a solid starting point for placing a new panel.

Step 3: Remove the Damaged Panel

With the glass stops off, you’re ready to extract the damaged panel. Panels are often held in place with silicone or nails, which may make removal tricky. Use a putty knife or pry bar to gently ease the panel out. Be patient and work around the edges. Once free, clean up any silicone residue around the opening, which is crucial for a secure new panel fit, especially on solid wood exterior doors that face outdoor elements.

Step 4: Prepare the Opening

To help the new panel fit securely, clean the entire opening thoroughly. Remove any dust, adhesive, or splinters. Apply a small bead of silicone along the edges where the new panel will sit. This step is essential for creating a tight seal that can withstand temperature changes and humidity, which is particularly helpful for exterior doors.

Step 5: Insert the New Panel

Whether you’re using a single or two-part panel, it’s time to fit it into the door. For two-part panels, apply wood glue to the joining edge of one piece, align the second piece, and press them together. Position the panel into the opening, ensuring that it’s snug against the silicone. Press down gently but firmly to seat it evenly.

Step 6: Attach the Glass Stops

Cut new or existing glass stops to fit the panel opening, ideally cutting each end at a 45-degree angle for a professional, seamless look. Carefully nail the stops into place with finishing nails spaced evenly along the frame. This step secures the panel firmly and gives the door a finished look. Double-check that the stops are flush and the panel is securely in place.

For a more comprehensive walkthrough on wood door panel replacement, here is a visual guide for you: 

Additional Tips for a Smooth Panel Replacement Process

Here are some useful tips you must keep in mind during your DIY door panel replacement so the process goes as smoothly as possible. 

1. Choosing the Right Material for Your New Panel

When selecting the material for your new door panel after replacement, keep the door’s location and your own vision in mind. For instance, wood panels are great for insulation, and they add warmth to the interior/exterior, while glass panels allow natural light to pass through, but you have to be mindful of your privacy. We recommend you choose a material that will hold up to weather and usage without compromising on style. 

Having the right tools on hand makes all the difference. Essentials include a hammer and chisel to remove the old panel, a pry bar for stubborn edges, a drill and jigsaw if you need to cut or adjust the panel size, and finishing nails and silicone to secure and seal everything in place. 

3. How to Ensure a Perfect Fit

If you want the new panel to fit perfectly on your solid core wood doors, then take accurate measurements of the panel opening before you cut or buy a new one. Measure twice for greater precision and trim down the panel with a jigsaw in order to make it align perfectly. 

Wrapping Up 

Performing a wood door panel replacement by yourself might seem daunting at first, but with the right tools and by following the steps above, you will be done with the DIY in no time! Remember to take accurate measurements and use high-quality materials for a long-lasting result—your efforts will be rewarded with a door that looks refreshed and functions beautifully.

If you want to learn more, please visit our website Custom Wooden Doors.